Korttiaskartelu

1. Remove the punched-out piece of paper from the front of the passepartout card, revealing the aperture.

2. Cut a piece of green paper measuring 10 x 14.5cm and attach it onto the front of the card, covering the aperture from the outside. Use double-sided adhesive tape.

3. Open the passepartout card and cut out the “window” from the inside. Cut notches in the corners as shown in the picture and also cut off the pointed flaps.

4. Fold the paper around the edges of the cut-out window and attach the paper onto the inside of the window with double-sided adhesive tape.

5. Cut two pieces of card – a white and a green – measuring 1.7 x 6.5cm. Cut very thin notches along the long edge in the two pieces of card and attach them both to the front of the card.

6. Cover the removed punched-out piece of paper (which covered the aperture of the passepartout card) with paper and attach it onto the back of the inside of the gap in the card using double-sided adhesive tape.

7. Cut out a house from the design paper and attach it to a white piece of card slightly larger than the cut-out house. Attach the house inside the frame of the card.

8. Glue on punched-out letters and rhinestones.